VOGT-CTE - WE DELIVER FLAME RETARDANTS

The increasing prevalence of lithium-ion batteries in electric vehicles, solar systems, and many electronic devices brings not only technological advancements but also new challenges in fire safety.

Fires caused by lithium-ion batteries pose unique risks, as conventional fire extinguishers designed for standard fire types are often not adequately effective.

This can delay extinguishment and significantly increase the extent of damage and danger. In response to this issue, “FlameBlock Lithium Black” is introduced as an innovative safety solution specifically developed for lithium-ion battery fires.

THE-FIRELAB - FLAME RETARDANTS

THE-FIRELAB
HYDRA-X
High-performance firefighting water additive for versatile use.

THE-FIRELAB
LITHIUM-BLACK
Lithium Black quickly extinguishes and controls lithium-ion battery fires

THE-FIRELAB
TITAN-ATOM
Fire protection system for the suppression of fires in electrical systems

THE-FIRELAB
MASTIC
High-performance, fire-resistant paste that creates fire protection barriers

THE-FIRELAB
FABRIC-SHIELD
Fabric Shield is an innovative, fire-retardant solution for fabric treatment.

THE-FIRELAB
NO-PANIC
No-Panic is a drop-in solution for combating pan and grease fires

LET'S TALK AND STAY IN TOUCH

YOUR CONTACT PERSONS

OUR BUSINESS AREAS

Vogt-CTE
Rescue
Business area for products related to rescue and emergency services

Vogt-CTE
Defense
Business field for products related to defense and security

Vogt-CTE
Energy
Business sector for products related to mobile power supply

Vogt-CTE Fire Retardants
Business sector for fire protection and fire safety products

LANGUAGE SETTINGS

GLOSSARY: ROOM FIRES, BUILDING FIRES, AND APARTMENT FIRES (A–Z)

Term	Detailed Explanation
Airflow Influence	The effect of openings and ventilation on fire development. Increased air supply often leads to greater fire intensity.
Backdraft	An explosive ignition caused by the sudden introduction of oxygen into an under-ventilated fire compartment.
Building Construction Class	Classification of buildings according to their structural design. It influences fire resistance and fire behaviour.
Building Fire	A fire involving load-bearing or compartment-forming parts of a building. It presents a significant risk to structural stability and fire spread.
Building Material Class	Classification of building materials according to their reaction to fire, such as non-combustible or normally flammable.
Ceiling Gas Flow	A hot stream of smoke and combustion gases moving beneath the ceiling and rapidly spreading fire horizontally.
Combustion Gas	Gaseous products of combustion that are often hot and toxic. They are a major cause of fatalities in residential fires.
Combustion Rate	The speed at which a material burns. It depends heavily on the material, exposed surface area, and oxygen supply.
Compartment Fire	A fire confined to a room or enclosed space that can intensify very rapidly.
Convection Current	The movement of hot gases upward and cooler air downward due to temperature differences.
Decay Phase	The stage in which fire intensity decreases because fuel or oxygen becomes limited.
Direction of Spread	The direction in which fire, smoke, and heat move. It is influenced by airflow, geometry, and fire load.
Exhaust Opening	An opening through which hot combustion gases and smoke flow out of a room. It has a major influence on fire development and smoke distribution.
Fire Compartment	A structurally separated area designed to limit the spread of fire and smoke.
Fire Development	The progression of a fire from ignition through growth and full involvement to decay.
Fire Dynamics	The development of a fire over time and the changes in its intensity. Compartment fires can develop extremely rapidly.
Fire Gas Layer	An accumulation of hot smoke and combustion gases beneath the ceiling. It is a major hazard zone for firefighters.
Fire Growth	The development of a fire from ignition towards full involvement or eventual decay.
Fire Load	The total quantity of combustible materials in a room, including furniture, textiles, and wall or ceiling coverings.
Fire Resistance	The period for which a building component can withstand fire exposure before failing.
Fire Spread	The transfer of fire to adjacent rooms or buildings through flames, radiant heat, or airborne embers.
Fire Wall	A highly fire-resistant wall designed to separate buildings or fire compartments.
Flame Spread	The speed and direction at which flames move across the surface of materials.
Flashover	The sudden ignition of nearly all combustible surfaces within a room, marking the transition to a fully developed fire.
Floor or Surface Fire	A fire spreading across a larger surface area, such as floor coverings or groups of furniture.
Full Room Involvement	The phase of maximum fire intensity in which the entire room is involved in combustion.
Furnishing Fire	A fire primarily involving furniture, carpets, curtains, and other interior furnishings.
Heat Exposure	The thermal impact on people, building components, and furnishings.
Heat Release Rate	The rate at which thermal energy is released by a fire. It is a key factor in determining fire severity.
Heat Transfer by Conduction	The transfer of heat through solid materials, such as walls, floors, or ceilings.
Hot Gas Layer	A layer of extremely hot combustion gases beneath the ceiling. It can become life-threatening within seconds.
Incipient Fire	A fire in its earliest stage with limited heat release and spread. It can often still be controlled using portable extinguishing equipment.
Initial Fire Stage	The early phase of a fire with limited extent. At this stage, it is often manageable with first-aid firefighting equipment.
Interior Attack	Firefighting operations conducted inside a building. This is particularly hazardous during compartment fires.
Interior Furnishings	All non-structural and usually combustible contents and fittings within a room.
Insulating Effect	The heat-retaining effect of smoke and gases, which can trap and intensify heat within a room.
Low-Temperature Fire	A fire with limited flame formation but substantial smoke and combustion-gas production.
Mixed-Material Fire	A fire involving several different types of material simultaneously, as is typical in residential fires.
No Visibility	A condition in which visibility is reduced to nearly zero by dense smoke. It creates a major risk for orientation and rescue operations.
Open Flame	Visible combustion involving flames. Open flames are not always present during compartment fires.
Oxygen Depletion	A reduction in oxygen concentration caused by combustion. It promotes incomplete combustion and smoke-gas production.
Oxygen Deficiency	A reduced oxygen level that can cause unconsciousness and incomplete combustion.
Radiant Heat	Heat transfer without direct contact. It can ignite materials in areas remote from the fire.
Residential Fire	A fire within a dwelling or residential unit. Common causes include electrical faults, candles, and cooking.
Re-Ignition	Renewed ignition after a fire appears to have been extinguished.
Rollover	The ignition of accumulated combustible gases in the upper part of a room, often shortly before flashover.
Secondary Fire	A subsequent fire caused by heat transfer, sparks, or airborne embers from the original fire.
Smoke Layer Descent	The downward movement of the smoke layer within a room. It marks a critical stage for rescue operations.
Smoke Layering	The separation of hot smoke in the upper part of a room from cooler air below.
Smoke Inhalation Poisoning	Poisoning caused by inhaling toxic combustion gases. It is a leading cause of death in residential fires.
Smouldering Fire	A slowly developing fire without visible flames but with substantial smoke production.
Stack Effect	Vertical movement and spread of fire and smoke through stairwells, shafts, or open storeys.
Surface Ignition	Ignition of furniture, wall coverings, or other surfaces caused by radiant heat.
Textile Fire	A fire involving textile materials such as curtains, carpets, or clothing. It can spread very rapidly.
Thermal Exposure	The total effect of heat on people and materials.
Toxicity	The degree of harmfulness of combustion gases. Toxicity is often particularly high when plastics burn.
Ventilation	The supply and removal of air, smoke, and heat through openings or mechanical systems.
Water Damage	Secondary damage caused by firefighting water, which may in some cases exceed the direct fire damage.
Smoke Extraction	Measures used to remove smoke and heat from a building. These are essential for rescue operations and firefighting.
Ignition Source	The source of ignition, such as an open flame, electrical energy, or a hot surface.
Ignition Temperature	The temperature at which a material begins to burn without exposure to an external flame.

WE DELIVER INNOVATIVE FIRE EXTINGUISHING AGENTS
At Vogt-CTE, we provide our European trading partners access to unique innovations in fire extinguishing technology. Our solutions facilitate firefighting efforts, making them faster, safer, and less resource-intensive. The products we represent are highly specialized, field-tested, and make a real difference – saving lives every day. We don’t just bring products to market; we deliver progress. Together with our partners, we ensure these innovations reach those who need them most: those on the front lines conducting rescue operations.